VStar 950 LED Brake Light and License Plate kit

VStar 950 LED Brake Light and License Plate kit

This product is currently out of stock and unavailable.

SKU: LM-04V9-226 Tags: , ,
  • Description
  • Additional information
  • Reviews (0)
  • Product Notices

Description

Clean up the rear fender of your V Star 950 with this LED brake turn license plate kit. This product replaces the stock cluster on the back of the V Star stock rear fender. The LED follows the rear design of the V Star rear fender which gives your ride a clean custom look. The brightness of the red LED is more than enough at night and it works very good during the day. Included is a red LED brake light with built in turn signals, you have the choice of three different color tubes to hold the red LED. Also included is a 7″ license plate frame (USA size) and a license plate light. The LM Logo plate is no longer available and you will need to source your own cover plate.  The kit is finished off with hardware and instructions.

What you need to know:

  • The complete rear plastic section on your stock rear fender will be replaced.
  • You will have to wire this kit into the stock wire harness. Please see wire diagram below.
  • Due to the shape of the rear fender, the turn signals are not as visible as stock. We suggest adding the extra turn signal LED’s for the best results.
  • LED only comes in red, but you can change the color of the outer tube. There is the function to run this in dual mode, as running lights and brake / turning. The turn signals will flash fast with out a equalizer module.
  • The extra LED option comes as two 3.4″ LED stripes that can attach to either side of the license plate holder (SEE IMAGE ABOVE) or maybe another place on the back of the motorcycle. These red LED lights can be used for running, turning, or brake with your choice of color tubing.
  • The 7″ license plate frame fits USA motorcycle issued plates. If you have a different size license plate then 7″ then the supplied frame will not be the right size for you. However you still get the supplied hardware, support tabs and a license plate light.
  • The LM Logo plate is no longer available and you will need to source your own cover plate.

  • This product fits: V Star 950 all years
  • Installation time: 1 hr.

  • Can I install this part, or should I have a professional handle it?
    Yes, you can install this if you have some basic garage skills. This does require wiring to your stock wire harness. We take the plug off the stock harness and attach it to our new LED brake light.
  • How bright is the LED?
    Excellent at night (the most important) and very good during the day. Please understand this is a custom item and if visibility is your main concern then we suggest adding more lights to improve this function.
  • Can you see the turn signals from the rear?
    Not very good, we suggest adding the extra LED’s to other parts of your ride to improve this function.
  • Will my turn signals still function as normal?
    With this kit the turn signal will blink faster than normal, but this will not hurt anything. You can get a equalizer to slow them down like the stock lights.

Additional information

Weight 2 lbs
Dimensions 12 × 12 × 8 in
LED tube color

RED, SMOKED, CLEAR

License Plate color

BLACK, CHROME

Reviews

There are no reviews yet.


Be the first to review “VStar 950 LED Brake Light and License Plate kit”

With our fiberglass products, we require you, or your mechanic, pre-fit the product to your motorcycle before painting or finishing. We have fixtures for accurate fit but sometimes parts may not fit. If you submit a claim that will require a replacement or refund, we only provide the value of the product(s) at the time of shipping.