Short Rear Fender Eliminator for the Star Bolt

Short Rear Fender Eliminator for the Star Bolt

  • Description
  • Additional information
  • Reviews (3)
  • Product Notices

Description

This Short Fender Eliminator really helps clean up the back of the Star Bolt rear fender by removing all of the stock cluster that holds the license plate. Our eliminator still allows for the rear brake light pod to be mounted to the fender. You can remove it entirely and patch over the hole with our provided hexagon LM sticker. This product comes with an unfinished surface that is made to be primed and painted over. Your selected LED light will be attached and ready to install.

What you need to know:

  • Stock fender is not included.
  • This product replaces the stock plastic cluster on the back of the stock rear fender. The license plate will need to be installed at another location.
  • Connectors are not included. You will need to do some wiring to integrate the new LED to the stock wire harness (See diagram).

 

Installation directions

  • This product fits: Yamaha Star Bolt
  • Installation time: 1 hr.

download manual

Frequently Asked Question

  • Is this legal in my state?
    You need to check your local laws and regulations. Contact your local Department of Motor Vehicles (DMV).
  • Can I bolt this part to my stock fender?
    Yes, This product is intended to mount to the stock fender.
  • Can I keep my stock tail light on the rear fender?
    Yes, this product will allow and work fine with the stock tail light on the stock rear fender.
  • Does this kit come with everything I will need?
    Yes, besides the tools and connectors. This is a direct replacement of the stock rear cluster and we offer a wire diagram for the LED.

Additional information

Weight 2 lbs
Dimensions 11 × 11 × 7 in
Function

TURNS ONLY, RUN, BRAKE, AND TURNS, RUN, BRAKE, AND INTEGRATED TURNS

LED color

ALL RED, ALL AMBER, AMBER / RED / AMBER

Tube color

SMOKED, CLEAR, RED

3 reviews for Short Rear Fender Eliminator for the Star Bolt

  1. 4 out of 5

    I gotta say I love the slick minimalist design of this rear fender eliminator, really looks great on the bike. The install is relatively simple, I have never done a body mod on a bike before but it was dead easy.rnI am not giving it 5 stars because there are just a few minor gripes I have that add up to a 4/5 rating:rnrn-This product requires a license plate relocation kit, sold separately.rn-The LED strip on the back wasn’t glued properly, it started coming loose and I had to refasten it.rn-The wires are a very high gage and feel flimsy, better make sure you get them good and tucked in there.rn-The fit to the existing mounts inside the fender wasn’t perfect. There was some groaning and creaking going on while I forced the product onto the bolts.

  2. 5 out of 5

    I installed this shorty fender kit and plate relocation kit and was really piece of cake. Everything fit well and looks great. My kit included 3 dual element adapters, I used one for the running/brake function on LED element which worked first time much to my surprise. I have a background in electronics so was pretty easy figuring out the wiring but might be a long project for someone with no electronic experience. Highly recommend.

  3. 5 out of 5

    I love the way this makes my Bolt look. My only criticism of the product is that the hole the wires go through are a bit sharp on the corners. I fixed the problem by hot gluing all the wires in place on the fiberglass, but future models could improve either gluing the wires down as well or rounding off the drilled holes for the wires in the fiberglass.


Add a review

With our fiberglass products, we require you, or your mechanic, pre-fit the product to your motorcycle before painting or finishing. We have fixtures for accurate fit but sometimes parts may not fit. If you submit a claim that will require a replacement or refund, we only provide the value of the product(s) at the time of shipping.